Optical Detectors for Power Measurement
Réalisez des mesures de puissance aussi faibles que quelques picowatts.
Détecteurs Optiques
The PH sensors are high power optical detectors for measurements up to 750 mW.
Trois versions:
- Silicone 300 - 1 100 nm, jusqu'à 750 mW
- Silicone UV 200 - 900 nm, jusqu'à 30 mW
- Germanium 800 - 1 650 nm, jusqu'à 500 mW
Choix des atténuateurs
OD1/OD2 attenuators sold in option. When bought together, the photodetector is calibrated with and without the attenuator.
With the PH-I series optical detecors with integrated digital (USB) or analog (BNC) modules are offered. - That means: no need for a monitor!
Two types of photodetectors are offered:
- PH-I-USB:
Powered by your PC. Plug the device directly to your PC, no need for an additional PC-Interface
LabView Software included - Take full control of your instrument with the unique software. - PH-I-BNC:
Battery or AC powered. - Includes 9 V battery and AC power eliminator
For use with an oscilloscope - plug the device directly to your oscilloscope
Noise level down in the fW
The PH-D photodetector is a very sensitive optical power detector. It measures down to 10 pW level. The PH-B head can be connected to a PC with the DPM: digital power module. DPM is digital, powered by USB and includes a powerful application software.
