UK50-0115

Laser light can be delivered to any location with the use of fibre optics, however, one challenge is to efficiently couple the light into and out of the fibre. In general it is necessary to collimate the laser beam during output coupling.

To make this process as simple as possible, we have developed focusable fibre optic collimators, manufactured in Germany. Available in two diametres, Ø11.5 mm and Ø19 mm, these collimators are suitable for step-index fibres with 0.22 NA, with single-mode fibres, and CO₂ fibres with Ø750 µm or Ø1000 µm core diametres.

These collimators consist of lens systems that are anti-reflection coated for different wavelength ranges. Choose any of the standard wavelengths 350-700 nm, 650-1050 nm, 1050-1060 nm, or 10.6 µm.

Furthermore, the focal length of the system can also be selected. Depending on the application, the beam diametre requirements are very different. The correlation between beam diametre and operating distance is shown on the product datasheet.

All collimators can include connectors, such as; SMA, FC wide key, FC small key, FC/APC wide key, and FC/APC small key. Other connectors are also available upon request.

Datasheet:

Further product information:
Fibre Collimator

Manufacturer:
LASER COMPONENTS Germany / Fibre Optics

Contact:

Contact Person:	Chris Varney
Company:	LASER COMPONENTS (UK) Ltd.
Address:	Goldlay House 114 Parkway
Postcode / City:	CM2 7PR Chelmsford Essex
Phone:	+44 1245 491499
Fax:	+44 1245 491801
Email:	cvarney@lasercomponents.co.uk