Contact

Laser Components (UK) Ltd.
Goldlay House,
114 Parkway,
Chelmsford Essex CM2 7PR
United Kingdom
Phone: +44 1245 491 499
E-Mail: info@lasercomponents.co.uk

Directions

Directions to Laser Components (UK) Ltd.Calculate route

Please contact us. We are glad to help!

(Fields with an * are required)
Contacting:
LASER COMPONENTS
Drucken
  • English
  • Deutsch
  • Français

Press Releases

We regularly update news editors and other interested parties with our news ticker. All newsworthy information at LASER COMPONENTS is available here first! You will find the press releases in chronological order below. If you are looking for press releases from a specific department, use the navigation bar on the side. We differentiate between general company news and news from the product groups: photodiodes, IR components, photon counters, lasers, measurement devices, fiber-optical components, optics, and laser accessories.

Lasers for Raman Spectroscopy and SERDS

19.06.12

VBG® stabilized Laser Sources


With the help of Raman spectroscopy, the material properties of semiconductors or pigments, for example, can be very precisely analyzed. As the ideal excitation source, LASER COMPONENTS now offers VBG®-stabilized laser sources from its partner PD-LD.

The laser wavelength of the LS-1 is stabilized by the use of a volume Bragg grating (VBG®) at a precision of ±0.5 nm. Across an operating temperature range of 0°C to 40°C, a wavelength stability of ±0.005 nm can be achieved. At the same time, the optical full width half maximum is reduced to <0.1 nm.

The innovative laser source LS-2 delivers a SERDS laser line pair with a wavelength difference of Dl = l2 – l1 = 0,1..1,0 nm. The wavelength tolerance here is also ±0.5 nm at a stability of ±0.005 nm. SERDS, shifted excitation Raman differential spectroscopy is a further development of the Raman spectroscopy to seperate Raman signals from the background noise. The SERDS principle is based on the excitation of the Raman effect with two wavelengths that are spectrally very close together at a distance of the full width half maximum of typical Raman lines.

The new LS-1 and LS-2 VBG-stabilized laser sources are available with the following standard wavelengths: 647 nm, 785 nm, 830 nm, and 1064 nm. Further wavelengths are available upon request. Coupling the laser beam with an optical power of up to 1 W is done using an FC/PC plug. The laser systems can be used immediately and are easy to operate. The parameters can be set either directly on the system or using a USB 2.0 interface.


Further product information:
Complete High Power Laser Systems

Manufacturer:
PD-LD Inc.

Contact:

Contact Person:    Stuart Nunn
Company:    LASER COMPONENTS (UK) Ltd.
Address:    Goldlay House 114 Parkway
ZIP / City:    CM2 7PR Chelmsford Essex
Phone:    +44 1245 491499
Fax:    +44 1245 491801
Email:    snunn@lasercomponents.co.uk
 

The LS-2 VBG-stabilized laser sources

Downloads:
LS-2.jpg
VBG stabilized laser sources for raman spectroscopy and SERDS.pdf