Contact

LASER COMPONENTS GmbH
Werner-von-Siemens-Str. 15
82140 Olching / Germany

Phone: +49 (0)8142 / 28 64-0
Fax: +49 (0)8142 / 28 64-11

E-Mail: info@lasercomponents.com

Directions

Calculate route

Please contact us. We are glad to help!

(Fields with an * are required)
Contacting:
Drucken
  • English
  • Deutsch
  • Français

Press Releases

We regularly update news editors and other interested parties with our news ticker. All newsworthy information at LASER COMPONENTS is available here first! You will find the press releases in chronological order below. If you are looking for press releases from a specific department, use the navigation bar on the side. We differentiate between general company news and news from the product groups: photodiodes, IR components, photon counters, lasers, measurement devices, fiber-optical components, optics, and laser accessories.

Plasma Measurement Guarantees Reproducible Coating Properties

13.09.2018

Research Results


At the 16th International Conference on Plasma Surface Engineering (PSE) in Garmisch-Partenkirchen, LASER COMPONENTS will present the results of the PluTO+ joint research project for the first time. Under the auspices of the Association of German Engineers (VDI), the Ruhr University of Bochum and the Leibniz Institute for Plasma Research and Technology (INP), together with the developers at the Olching-based company, spent four years researching new methods for improving plasma-based coating processes. The aim of the project, which is supported by federal funds, is to increase the yield of functional optics and to achieve reproducibly uniform coating thicknesses.
“Plasma-assisted processes and optical monitoring enable us to implement denser and more precise dielectric coating systems,” explains Dr. Sina Malobabic, who supervised and coordinated the research project at LASER COMPONENTS. “However, even plasma states can change due to short-term fluctuations or long-term drifts. With complex coating systems, the coating process can take up to 18 hours. If irregularities occur, this can have serious consequences for the end product.”

A probe developed by the Ruhr University of Bochum now enables in-situ measurements of plasma parameters for the first time. Under the direction of Dr. Jens Harhausen, the INP provided significant support for the installation of measurement and control technology in production facilities. The first test measurements in LASER COMPONENTS’ coating systems led to positive results: The combination of plasma and layer monitoring allows new control concepts to be developed which can be used to adjust the coating properties more precisely. In the production process, not only the quality can be increased considerably but the resource efficiency as well.

“After we had defined the theoretical basics in the preceding project PluTO, it was now a matter of practical implementation in everyday industrial life,” explains Prof. Dr. Ralf Peter Brinkmann from the department of theoretical electrical engineering at the Ruhr University of Bochum. “With LASER COMPONENTS, we had an industrial partner at our side who not only has the appropriate production facilities but also a young, committed team of developers with the necessary scientific background.”



Further product information:
R&D Department

Manufacturer:
Laser Components GmbH / Optics Production

Contact:

Contact Person:    Rainer Franke
Company:    Laser Components GmbH
Address:    Werner-von-Siemens-Str. 15
ZIP / City:    82140 Olching
Phone:    +49 (0) 8142 2864-39
Fax:    +49 (0) 8142 2864-11
Email:    r.franke@lasercomponents.com
 

Subscribe to Press Releases

Would you like to receive regular updates and information on our products and services? Subscribe here for our free press service and stay up to date.

Subscribe now

Your contact person

Claudia Michalke

+49 (0) 8142 2864-85

c.michalke@lasercomponents.com