Click to change the region

Trends

The Key Word: Bandwidth

Data – Express Delivery Free of Charge

Since the beginning of digitization at the end of the 20th century, the development of networks has been dominated by one topic: bandwidth. Where once telephone, data, and moving images were transmitted across different paths, triple play has now become widely accepted: The conversion of all landline connections to internet telephony is almost complete in Germany. The digital versions of terrestrial TV and cable TV are still in operation but are becoming less and less significant. Services are migrating toward an all-encompassing network. Streaming, VR gaming, and SmartHome applications are further fueling the hunger for bandwidth. Above all, they show that even private households are now retrieving data volumes that were reserved for companies not that long ago. Only one material is currently capable of providing the necessary bandwidth: fiber optics. But why is that?

The Magic Word: Bandwidth

Into the Future at the Speed of Light

Beyond Borders

The first copper cables were laid in Germany back in the days of the emperor. Some of them are probably still lying around or installed in old houses. For a long time, they did their job well and – principally speaking – still could. But traffic has increased dramatically since that time. Just as in the streets of downtown, traffic jams inevitably occur during rush hour. What do the networks look like over which the data traffic of the future will run?

Why is an Optical Fiber Faster Than a Copper Cable?

“Which is faster? Copper or fiber?” If you ask this question to passersby on the street today, the answer will almost always be: “Optical fiber, of course.” But is that really true? And if it is true, why is that? As usual in science and technology, the answer is more complex; however, it is also more exciting than expected.

It is important to point out that in both cases we are talking about digital signal transmission. In the copper cable, the “zeros and ones” of the digital code are transmitted by electrical signals. Simply put, the current is switched on and off again and again. In an optical fiber, this transmission functions with the help of light. Thus, the cables are also referred to as fiber optic cables (FOC) in technical jargon. At first glance, you might say: “Then it is pretty clear because, as we know, nothing is faster than light.” That is of course correct. But it is also true that all electromagnetic waves travel at the speed of light, including electricity and radio waves. So why is light still the better transmission path in this case?

Higher Data Throughput

Beyond Borders

The number-one issue is still bandwidth. In industry jargon, this refers to data rate, which is the amount of information that is transmitted in one second. At a bandwidth of around 10 Gbit/s, cable television networks (CATV) are the most powerful copper networks. Depending on the type of fiber, optical signal transmission now allows several Tbit/s. In addition, technology today makes it possible to transmit many signals across one and the same fiber by assigning a specific wavelength (color) to each signal. There are now networks available that support up to 160 colors simultaneously.

Longer Range

Another advantage of fiber optics is their low attenuation: With the high-quality fibers available today, distances of up to 120 km can be bridged without signal loss. With copper cables, however, an electrical signal amplifier has to be installed every 500 meters or so. This makes network expansion much more complicated and, on top of that, costs energy and money.

Interference Free

Most optical fibers are made of quartz glass, which is a brittle and sensitive material. Copper, however, can be shaped almost at will. So, what material advantages should optical fibers offer? Quite simply, quartz glass is non-conductive and therefore resistant to electromagnetic influences. Copper, on the other hand, is one of the best conductors of all; therefore, signal interference can always occur.

Interference can be caused, for example, by nearby thunderstorms or simply by electrical devices that are operated in the vicinity. The phenomenon of “crosstalk,” in which conversations conducted on neighboring lines at the same time overlap each other, is also well known.

Moreover, temperature changes have little effect on optical fibers. This is illustrated by the fact that if copper is heated, its electrical resistance increases and inhibits signal transmission. A similar effect does not occur with optical fibers.

Future Proof

Beyond Borders

Although they are more expensive to manufacture, optical fibers are becoming more economical as bandwidth requirements increase, especially since the fibers and network components are comparatively low maintenance. Best of all, the technology is scalable for the foreseeable future. The networks can be adapted to the constantly growing bandwidth requirements with little effort because the fibers and splitters can continue to be used unchanged. Only the end devices may need to be replaced.

And How Do the Fibers Get into the Home?

“That’s all well and good, but we keep hearing that fiber rollout in Germany still leaves much to be desired.” So, when will the average citizen be able to enjoy this fabulous technology? Again, the answer is a bit more complex than the question:

Just picture a fiber optic network like you would a tree, in which water is distributed from the trunk, through smaller and smaller branches and twigs, to the individual leaves. In telecommunications, the trunk is referred to as the backbone or transport network. The leaves would be the so-called subscriber lines (i.e., the connection sockets) to which the user connects his terminal equipment (router, telephone, computer, television, ...). In Germany, the transport network now consists almost exclusively of optical fibers. The closer we get to the leaves of the tree, the more frequently we still encounter copper cables. The so-called “last mile” (i.e., the distance from the familiar gray distribution box at the roadside to the user’s home) is currently considered particularly critical.

The Association of Telecommunications and Value-Added Service Providers (VATM)i states that at the end of 2020, around 1.87 million of 41.5 million households nationwide were supplied with optical fibers. This corresponds to just 4.5% of households. However, the industry association also assumes that the network will be expanded to around 25 million households by 2026. The federal government’s broadband funding program is providing around EUR 12 billion for the expansion, which is to be used primarily in areas where data rates are still below 100 Mbit/s.

This means a lot of work for the companies involved. But the effort is worth it because fast internet is the key to the digital future.

LASER COMPONENTS Germany - Your competent partner for optical and optoelectronic components in Germany.

Welcome to LASER COMPONENTS Germany GmbH, your expert for photonics components. Each product in our wide range of detectors, laser diodes, laser modules, optics, fiber optics, and more is worth every Euro (€/EUR). Our customized solutions cover all conceivable areas of application: from sensor technology to medical technology. You can reach us here:

Werner-von-Siemens-Str. 15
82140 Olching
Deutschland

Phone: +49 8142 2864-0
Email: info(at)lasercomponents.com

Team of experts
You have questions or need our support?
Please call us.
Dr. Andreas Hornsteiner
Head of Business Unit Fiber Optics
Dr. Andreas Hornsteiner
LASER COMPONENTS Germany GmbH
82140 Olching
Contact Form
You would like to send us something? You can reach us by phone and by e-mail.

Laser Components

Werner-von-Siemens-Str. 15
82140 Olching
Deutschland

You will be redirected
to the Fiber Technology Website ...