Werner-von-Siemens-Str. 15
82140 Olching / Germany

Phone: +49 (0)8142 / 28 64-0
Fax: +49 (0)8142 / 28 64-11



Calculate route

Please contact us. We are glad to help!

(Fields with an * are required)
  • English
  • Deutsch
  • Français

IR Filters

A wide variety of interference filters in the IR range is available: Bandpass filters, long-pass filters, short-pass filters, blocking filters, and dichroic splitters are included in this range of products.

IR Filter
IR Filter

IR Bandpass Filters

Dielectric bandpass filters according to customer specifications. The infrared filters are available in the wavelength range from 1.0 µm to 20.0 µm.

IR Filters

Infrared filters in the range from 1.0 µm – 20.0 µm

The infrared filters offered here are largely produced according to customer specifications. You may directly access the IR filters available using our online stock lists.

Tips for Selecting the Right Filter:

The customer is free to choose the central wavelength in bandpass filters as well as the cut-on and cut-off wavelength in broadband bandpass filters.
It is important to pay attention to the tolerance.

Different standard full width half maximum values in bandpass filters (e.g., 1.1%, 2%, 4.3%, 8%, or 11%) are specified. Each specification refers to the value of the central wavelength selected.

The standard size is usually 25.4 mm in diameter. Some filters are mounted. In this case, the aperture is approximately 21 mm.

Custom sizes and filter chips are delivered without mounts.

Online Filter Selection

Now you can check online which optical filters are in stock at our partner NOC - Northumbria Optical Coatings Ltd. You can directly place an order which, as usual, will be handled through us.

Your contact person

Björn Götze

+49 (0) 8142 2864-53