Light Transmission without Cladding Modes

LASER COMPONENTS introduces ModeStrip assemblies for effective transmission of high-power laser light through optical fibres. With this technology, cladding modes no longer pose a threat as the connectors filter undesired modes out of the fibre cladding.
Cooling fins are integrated to prevent the connector from burning.

Light transmission in optical fibres is based on the principle of total reflection.
Theoretically, the light is reflected multiple times without loss at the interface between the fibre core and fibre cladding. In practice the fibre cable is imperfect, and small amounts of power can enter the fibre cladding (coupling to cladding modes). This is a particular problem in the transmission of high optical power as just 2-3% of the light maybe sufficient to destroy the fibre cable.

The ModeStrip connector developed by LASER COMPONENTS contains a mode stripper, which strips the optical fibre of its cladding modes and conducts the generated heat away in a controlled manner via cooling elements preventing the thermal destruction of the fibre connector.

Fibre cables with ModeStrip connectors are mainly used in high power applications e.g. in laser material processing and optically pumping of fibre lasers. They are also used when a high optical beam quality, without cladding modes, is required or when thermal hotspots must be avoided in the fibre cladding.

Further product information:
Fibre Assemblies and Connectors

Manufacturer:
LASER COMPONENTS Germany / Fibre Optics

Contact:

Contact Person:	Chris Varney
Company:	LASER COMPONENTS (UK) Ltd.
Address:	Goldlay House 114 Parkway
Postcode / City:	CM2 7PR Chelmsford Essex
Phone:	+44 1245 491499
Fax:	+44 1245 491801
Email:	cvarney@lasercomponents.co.uk