Laser Modules for Industrial Image Processing
FLEXPOINT® MV femto – Shorter than a Match
D65-074
Shorter than a match, thinner than a pen: this is the MV femto, the smallest line laser for industrial image processing.
The new laser module measures 8 mm in diameter and is 40 mm long, which makes it suitable for 3D laser sensors that offer very little space.
We watch your waistline: the focus of the MV femto is factory-set to the working distance you require. This allows you to achieve the best line quality possible (i.e., as small and homogeneous as possible). The line thickness can be reduced to as low as 20 µm. Standard homogeneity reaches ± 20%, and enhanced homogeneity can even reach ± 15%.
Further specifications: the MV femto is available in two different wavelength ranges – red (635 660 nm) and NIR (785 850 nm). The maximum output power is 50 mW.
The line lasers can be operated with a voltage between 4.5 and 30 VDC. The laser modules are available with digital modulation or power control upon request.
Like all FLEXPOINT® lasers we can also customize the MV femto to fit your requirements. Just inquire with us, and we will take care of it!
Datasheet:
Further product information:
FLEXPOINT® MVfemto
Manufacturer:
Blau Optoelektronik GmbH
Contact:
Contact Person: | Jochen Maier |
Company: | Laser Components Germany GmbH |
Address: | Werner-von-Siemens-Str. 15 |
ZIP / City: | 82140 Olching |
Phone: | +49 (0) 8142 2864-22 |
Fax: | +49 (0) 8142 2864-11 |
Email: | jochen.maier@lasercomponents.com |
|