S178 LDF Splicer for Laser Service
For the Service Teams and Production Facilities
D73-020
The field splicer FITEL S178LDF is robust and compact; optical fibers with diameters from 125 µm to 450 µm can be spliced with this unit. This device is particularly advantageous for service teams that travel worldwide for laser manufacturers because the S178LDF weighs less than 4 kg, including the service case.
Splicing can be carried out with a power supply unit or a rechargeable battery. Due to its small dimensions, it takes up only a very small amount of working space. This splicer and the ProCleave LDF cleaver from our partner Northlab is the perfect combination of splicing equipment.
As long as a PM splice is not required in laser production, the S178LDF is an inexpensive alternative to traditional laboratory splicing units, which are large and expensive. Precise three-axis adjustment can be applied for both the core-to-core alignment and the cladding alignment of fibers. Via the optional smartFUSE software, the fibers can also be actively adjusted to maximum light transmittance.
Inquire with us: The S178LDF is also available for testing!
Datasheet:
Further product information:
3 Axis Splicers
Manufacturer:
Fitel - a Furukawa Electric Co., Ltd. Company
Contact:
Contact Person: | Tobias Grebing |
Company: | LASER COMPONENTS Germany GmbH |
Address: | Werner-von-Siemens-Str. 15 |
ZIP / City: | 82140 Olching |
Phone: | +49 (0) 8142 2864-738 |
Fax: | +49 (0) 8142 2864-11 |
Email: | tobias.grebing@lasercomponents.com |
|