Contact

LASER COMPONENTS GmbH
Werner-von-Siemens-Str. 15
82140 Olching / Germany

Phone: +49 (0)8142 / 28 64-0
Fax: +49 (0)8142 / 28 64-11

E-Mail: info@lasercomponents.com

Directions

Calculate route

Please contact us. We are glad to help!

(Fields with an * are required)
Contacting:
Drucken
  • English
  • Deutsch
  • Français

Pyroelectric Detectors

Pyroelectric detectors are thermal detectors; i.e. they create an electric signal due to temperature changes in the chip. This temperature change is caused by absorption of light. We do use LiTaO3 and DLaTGS as pyroelectric materials. Basically such detectors cover the whole spectra. However, they are mainly used for mid-wave and long-wave infrared detection (MWIR and LWIR). In addition, the usage in the THz region seems to become more popular these days.

Single Channel Current Mode Pyroelectric Detector

One-Channel LiTaO3 Pyroelectric Detector

Pyroelectric LiTaO3 single-channel detectors are available for current mode (CM) and voltage mode (VM).

LiTaO3 Single Channel Detector

This product line uses LiTaO3 as the chip material. We offer a broad range of active sizes and packages. Our smallest package is a TO-46 and our largest standard chip size is 3.0 x 3.0 mm2. We also offer versions for all common methods of driving pyroelectric detectors. These detectors can be tailored to applications by integrating bandpass filters or broadband windows. For details please see the separate “Filter and Window Selection Sheet”.

Two different types of pyroelectric detectors are available:

  • Current mode CM detectors
    L11 & L21 series
  • Voltage mode VM detectors
    L31 & L41 series

Currently, the op-amp-based current mode (CM) is only used by a minority of users; however, this minority is rapidly growing. We strongly recommend using this method of driving, especially for new developments. In our experience, customers profit from the following advantages: There is a relatively large signal on top of a small offset. In addition, this offset is more consistent across a wider temperature range.

This series has the following designation: L11 for detectors without temperature fluctuation compensation (TFC) and L21 for those with TFC. In general, L21 series components have a higher performance ratio than those of the L11 series. 

The JFET-based voltage mode (VM) is the traditional and still most popular method of operating pyroelectric detectors. From today’s standpoint, this method is only recommended for experienced users and/or for users attempting to temperature stabilize a pyroelectric detector. The designation L31 is for models without TFC and L41 for versions with TFC. TFC versions demonstrate a lower performance in voltage mode than versions with TFC.

Your contact person

Uwe Asmus

+49 (0) 8142 2864-43

u.asmus@lasercomponents.com

News »

Pyroelectric Detectors with Differential Amplifiers

Pyroelectric detectors are des...

Production Capacity of Pyroelectric Detectors Expanded

Laser Components Pyro Group’s ...