Light Transmission without Cladding Modes

LASER COMPONENTS is proud to present its first own ModeStrip assemblies at LASER World of PHOTONICS. This technology allows for effective transmission of high-power laser light through optical fibers. Cladding modes no longer pose any threat.

In theory, light transmitted through optical fibers is reflected without any loss at the boundary between the fiber core and cladding, but practical experience has shown that a small percentage of the light is absorbed into the cladding in the form of so-called cladding modes that may cause thermal problems. With high-power lasers, cladding modes of just 2% or 3% may destroy the connector.

The new assemblies presented by LASER COMPONENTS are equipped with cladding mode strippers. The generated heat is absorbed by a cooling element and no longer presents any danger to the connector.

Cladding mode strippers are most prominently used in high-power systems, such as welding and cutting lasers, or for the pumping of fiber lasers. They are also needed in systems that require high beam qualities without cladding modes or that have to avoid thermal hot spots in the cladding.

Experience the new ModeStrip assemblies by LASER COMPONENTS at booth B3.303!

Further product information:
Fiber Assemblies and Connectors

Manufacturer:
LASER COMPONENTS Germany / Fiber Optics

Contact:

Contact Person:	Michael Tuohy
Company:	LASER COMPONENTS USA Inc.
Address:	116 South River Road Building C
ZIP / City:	03110 Bedford, NH
Phone:	+1 603 821 7040
Fax:	+1 603 821 7041
Email:	optics@laser-components.com