Calibration Service for Fiber Attenuation Measurement Devices
LASER COMPONENTS has a calibration service available for measurement devices offered by AFL, Greenlee, Optotest, and VIAVI.
Greenlee light sources (LEDs or lasers) from the 25x and 26x series, optical power meters from the 56xXL, 57xXL, and 57xXL series.
Calibration is carried out through comparison using normalized measurement devices as well as on the basis of documented calibration methods, thus meeting DIN ISO 9001 standards. Calibration can be certifiably traced back to the national standards of the DKD (Deutscher Kalibrierdienst) or the PTB (Physikalisch-Technische Bundesanstalt).
Calibration is generally completed within one week of placing an order.
The service is offered for the following products:
Light Sources
LEDs or lasers
all sources from the OLS series
Optical Power Meters
all devices from the OLP & OPM series
Light Sources
LEDs or lasers
series xl
Optical Power Meters
series 56xXL, 57xXL, 58xX
Light Sources
LEDs or lasers
OP250, OP715
Optical Power Meters
OP725, OP815, OP930, OP940
Light Sources
OLS-34/35/36
OLS-5x laser source
Optical Power Meters
OMK-34, OMK-35, OMK-36, OMK-38, OMK-55
To send in your products for Calibration Service, you must have a return material authorization (RMA) number issued by Laser Components.
We regret that we are unable to process products sent to us without a corresponding RMA number. We will, therefore, return them at your cost.
Please note that our general terms and conditions apply, in particular the stipulations regarding RMA and the service fee we charge.
- To request an RMA number, please complete the RMA request form.
- If you have filled out your RMA request form completely and correctly, we will provide you with an RMA number. This RMA number is valid for 30 days. Afterwards, the number will be closed and returns no longer accepted.
- Along with the return shipment, please enclose the RMA return confirmation received from us. Please note the RMA number clearly legibly on the outside of the return shipment address label.
(To avoid problems when filling out the PDF form, please use Acrobat Reader.)
Quotation request:
We are more than happy to offer you a quote for the calibration of your device. Give us a call or send us an email.