LG Innotek UV LEDs
UK56-0810
Whilst emitters in UVB wavelengths (280-315 nm) are primarily used in medical technology, applications of UVC LEDs (200-280 nm) include:
- sterilisation
- water decontamination
- odour control
- food preservation
- phototherapy
- fluorescence spectroscopy
- counterfeit sensing
The RoHS compliant UVC LEDs are presented in “6060 1in1” packages, measuring 6.0mm x 6.0mm and consist of 1 emitter within the 1 package. There are 2 mW, 10 mW and 30 mW LEDs, referred to as LEUVA66B00HF00, LEUVA66G00HF00 and LEUVA66G00HV00 respectively.
The LEDs are static sensitive (class 2) and include Zener diode protection against supply polarity error. A rear heatsink allows for easy heat dissipation, which is important to maintain the lifetime of these devices. The typical viewing angle is approximately 110-130°, with a peak emission wavelength between 275 nm and 285 nm and with a spectral bandwidth of approximately +/- 8nm at FWHP.
Higher optical power emissions are possible by connecting these UV LEDs in parallel, although each LED must include its own series resistor. The LEDs are operated in forward bias as reverse bias can cause damage.
Further product information:
UVC LEDs
Contact:
Contact Person: | Chris Varney |
Company: | LASER COMPONENTS (UK) Ltd. |
Address: | Goldlay House 114 Parkway |
Postcode / City: | CM2 7PR Chelmsford Essex |
Phone: | +44 1245 491499 |
Fax: | +44 1245 491801 |
Email: | cvarney@lasercomponents.co.uk |
|