Versatile Transimpedance Amplifier

The JTIA1-1G transimpedance amplifier from ifw optronics amplifies the photocurrents generated by SiC UV photodiodes, which are only a few nanoamperes strong, and converts them into a usable voltage level. The user can select from the following three preconfigured resistance values via jumpers: 10 MOhm, 100 MOhm, and 1,000 MOhm. Depending on the setting, the photocurrent is amplified in a ratio between 1 V/nA and 0.1 V/μA. In addition, the output voltage can be amplified by a factor between 1× and 11× via a trimming potentiometre. This value is freely selectable.

The component, which is available from LASER COMPONENTS, is particularly user friendly. Photodiodes in TO5 or TO18 housings can be connected directly to the board. Since the JTIY1-1G supports numerous application possibilities, users do not have to develop their own circuit boards to use their SiC UV photodiodes as quickly as possible.


Visit LASER COMPONENTS at LASER World of PHOTONICS.
April 26-29, 2022; Booth C5.403

The Company
Laser Components

Further product information:
SiC Photodiodes (200 - 400 nm)

Manufacturer:
ifw optronics GmbH