Click here to change sales region

ZnSe Windows for CO2 lasers

As for the lenses only high-quality substrates are used for the windows.

ZnSe windows (Type WNZ) are used as end elements or protective windows. Similar to cutting lenses, they are made exclusively with high quality "laser grade" material.

In addition to standard AR coatings for 10.6 µm, special coatings such as broadband ARs or dual-band ARs are available.

General Specifications

  • Diameter tolerance: +0/- 0.2 mm
  • Thickness tolerance: ±0.25 mm
  • Wedge: <3 arc min
  • Surface figure: typ. λ/20 at 10.6 µm (depending on diameter/thickness ratio)
  • Clear Aperture: >85 % of diameter

Further specifications can be found on the data sheet.

ZnSe Brewster Windows (Type WBZ) and ZnSe Enhanced Brewster Window (type EWBZ)

Brewster windows are used in polarization separation. If WBZ windows are installed below the Brewster angle (q= 67.4° for ZnSe), the p component is fully transmitted and approximately 50% of the s component is reflected per side. When using EWBZ windows, a special coating is applied to the front side of the window, which ensures that the reflection for s-pol is increased to >98%.

General Specifications

  • Diameter tolerance: +0/- 0.2 mm
  • Thickness tolerance: ±0.25 mm
  • Wedge: <3 arc min, or on request 2.0±1.0 arc min.
  • Surface figure: typ. λ/20 at 10.6 µm (depending on diameter/thickness ratio)
  • Clear Aperture: >85 % of diameter

Further specifications can be found on the data sheet.

Have the coating of your ZnSe windows regularly refurbished by us! You can find out more about our services here:

LASER COMPONENTS France - Your competent partner for optical and optoelectronic components in France.

Welcome to LASER COMPONENTS S.A.S., your expert for photonics components. Each product in our wide range of detectors, laser diodes, laser modules, optics, fiber optics, and more is worth every Euro (€/EUR). Our customized solutions cover all conceivable areas of application: from sensor technology to medical technology. You can reach us here:

45 Bis Route des Gardes
92190 Meudon
France

Phone: +33 (0) 139 595 225
Email: serviceclient(at)lasercomponents.fr

Team of experts
You have questions or need our support?
Please call us.
Elvyne Egrot
Sales Manager
Elvyne Egrot
LASER COMPONENTS S.A.S.
92190 Meudon
Contact Form
You would like to send us something? You can reach us by phone and by e-mail.

Laser Components

45 Bis Route des Gardes
92190 Meudon
France

Phone: +33 (0) 139 595 225

You will be redirected
to the Fiber Technology Website ...