For the transmission of high laser powers, we assemble silica fibres with D80, SMA or DIN connectors - optionally also with ModeStrip technology.
We have been manufacturing fibre assemblies in Olching since 1995 and have specialised in fibres for the transmission of high laser power. We can guarantee a high level of cleanliness of the fibre end surface through controlled cleanroom conditions.
Another special feature offered by LASER COMPONENTS is the fibre laser polishing technique developed in house. This considerably increases the efficiency of coupling power into the fibre.
Upon request, we can supply you with measurement reports for the fibre assemblies you order:
SMA fibre assemblies are particularly used in pump fibres for diode lasers. One important quality feature is the eccentricity of the fibre core to the outer diametre of the ferrule. The standard specification is <10 µm; however, upon request, we can also manufacture assemblies with an eccentricity of <5 μm. In any case, each individual fibre cable is checked with a high-precision measuring microscope prior to shipping.
Furthermore, we can equip the fibre end surfaces with an anti-reflection coating to minimize back reflections during input and output coupling.
D80 laser assemblies are mostly used as connecting fibres for diode laser systems. The eccentricity is normally less than 10 µm; however, upon request, we can also guarantee an eccentricity of less than 5 µm by measuring all fibres with precision microscopes when goods are dispatched.
For D80 assemblies, we can also apply AR coatings to the fibre end surface upon request.
Diode-pumped solid-state lasers have a higher efficiency than their lamp-pumped counterparts. Laser diodes in the wavelength range between 808 nm and 980 nm are used for pumping. Pump fibres focus the pump energy on the laser rod.
Fibres with square cores, so-c...