10.05.2021

IBS optics for high-power lasers in material processing

Increase in laser fluence requires new coating options

Author: Barbara Herdt, LASER COMPONENTS Germany
Published: LP.PRO 05/2021, WEKA-Verlag

High-power lasers in femtosecond cycles- optics for laser material processing are subject to very different technical requirements. The IBS (ion beam sputtering) process offers manufacturers many options for achieving parameters that cannot be achieved with conventional coating methods, e.g., at high laser fluence.

Read more about this in the article by our laser optics expert Barbara Heldt (“Ion Beam Sputtering,” LP.PRO 5/2021):

High-power lasers for material processing
The ion beam sputtering (IBS) process
Advantages of IBS in comparison to classic λ/4 optical coating
Customized coating options

Download PDF (German version only)

Product Overview

Beyond Borders

Aspherical lens for correcting spherical aberrations

Aspherical lenses correct aberrations, which in monochromatic light include image sharpness errors and distortion.

A typical application of these lenses is the focusing of a collimated beam onto an optical fiber.

Additional components for the expansion of a laser system: Here you will find beam expanders, z-axes Shift, and beam tubes.

Kinematic Beam Splitter for Laser Setups

Laser beam directing components direct or deliver the laser beam to the workpiece.

Brewster Plate Polarizer for Laser Optics

Brewster plates are used to separate s- and p-polarized light.

Brewster plates have a rectangular shape and are inserted at a specific angle of incidence to the laser beam. Light that is polarized parallel to the plane of incidence/reflection is completely transmitted at Brewster’s angle, whereas about 50 % of s-polarized light is transmitted.

Broadband optical filters for wide wavelength ranges

Broadband filters allow wide wavelength ranges of incident light to pass through; in selected regions of the spectrum, these filters block the light.

Cavity end mirrors are used to generate the laser beam in the resonator.

Resonator end mirrors, also known as cavity mirrors, are designed to have high reflectivity at the desired laser wavelength in order to maximize the efficiency of the laser.

ROUND AND RECTANGULAR CYCLINDER LENSES ARE USED TO CREATE LINES / BEAM EXPANSIONS IN ONE DIRECTION.

We offer plano-concave and plano-convex cyclindrical lenses in rectangular, square, and round form.

Diagnostic Beam Splitter for Laser Beam Splitting

DIAGNOSTIC BEAM SPLITTERS FOR PROCESS MONITORING

Dichroic mirrors separate or combine two or more beams of different wavelengths in the desired ratio and enable process monitoring on the operating level in several wavelength ranges, as well as beam diagnostics. Their complex design enables multiple transmission and reflection ranges.

combine or separate two or more beams with different wavelengths.

Customized dichroic mirrors that are suitable for your individual application are manufactured upon request.

Graphical overview of short-pass and long-pass filters

Dichroic filters are edge filters for color separation used under diagonally incoming light.

The designs of these narrowband filters have been optimized for analytical applications.

Astronomical Optical Filters for Telescope and Imaging Systems

Astronomical filters are usually custom-made bandpass filters.

LASER COMPONENTS Nordic - Your competent partner for optical and optoelectronic components in Sweden, Norway, Finland, Denmark, and Iceland.

Welcome to LASER COMPONENTS Nordic AB, your expert for photonics components. Each product in our wide range of detectors, laser diodes, laser modules, optics, fiber optics, and more is worth every Crown (SEK). Our customized solutions cover all conceivable areas of application: from sensor technology to medical technology. You can reach us here:

Box 14001 / Skårs led 3
SE-400 20 Göteborg
Sweden

Phone: +46 (0)31 703 7173
Email: info(at)lasercomponents.se