Click here to change sales region

Supplier

Alluxa

TODO

Alluxa was founded in California in 2007 by a group of experts with many years of experience in thin-film and measurement technologies. It is worth noting that the multiple identical coaters were designed and built in house; thus, this team of some 90 employees can perform at an optimum level that is achieved nowhere else. Each coater covers the entire production process. The combination of modern automation technology and online monitoring, algorithms developed in house, and patented plasma coating processes facilitate individual hard coating processes that allow reproducible results due to full automation.

Comprehensive control over the entire coating process is what distinguishes Alluxa from its competitors. The factory is vertically integrated to focus its efforts on the sole design and manufacture of optical filters; from chamber design & assembly, to software deposition programming, to optical metrology and post-coating fabrication  The result is a highly specialized, and focused, expertise which can tackle the most challenging of thin-film problems. Furthermore, chamber and process redundancy mitigate chamber to chamber variations and eliminate any risk associated with equipment downtime.

A specially developed series of flat-top ultra-narrow band filters with a FWHM of <0.1 nm demonstrates excellent transmission/blocking behavior. Typical transmissions lie above 92% in combination with a broadband deep blocking performance of up to OD6. This is all thanks to the monitoring system developed in house for formats of up to multiple of inch in diameter, which can be considered to be at the technological forefront.

Edge filters, notch filters with broadband transmission and low ripple, dichroic elements (upon request, even available with a planarity of <0.1 waves/1”), multiband filters, and custom job coatings in the UV to the IR are all an integral part of the spectrum.

Carola Hillebrand
If you have
any questions
please contact us
 
Click here

Products

Broadband Filters

Broadband filters allow wide wavelength ranges of incident light to pass through; in selected regions of the spectrum, these filters block the light.

Short-Pass and Long-Pass Filters Short-Pass and Long-Pass Filters
Dichroic Shortpass and Longpass Filters

Dichroic filters are edge filters for color separation used under diagonally incoming light.

Filters for Analytics

The designs of these narrowband filters have been optimized for analytical applications.

Filters for Astronomy

Astronomical filters are usually custom-made bandpass filters.

Filters for Fluorescent Measurements

Components optimized for fluorescence measurements with exciter, dichroic and emitter.

Bandpass filters for machine vision Bandpass filters for machine vision
Filters for Machine Vision

Bandpass filters specially tailored to the requirements of machine vision.

3rd Millenium Fiters 3rd Millenium Fiters
Multi-Bandpass Filters

Multiband pass filters transmit multiple defined wavelength ranges and block all other parts of the spectrum.

Bandpass Filters Bandpass Filters
Narrowband Filters

Narrow band filters transmit light source signals in very narrow bands and minimize interference signals.

IR Filter IR Filter
Notch Filters

Notch filters are characterized by a high attenuation within a narrow wavelength range.

3rd Millenium Fiters 3rd Millenium Fiters
Short- and Long-pass Filters

Short and long pass filters are also known as edge filters. 

LASER COMPONENTS offers a wide variety of design options.
Standard Bandpass Filters

Bandpass filters transmit a certain wavelength range (pass band) and block all other parts of the spectrum (cut-off bands).

Ultrasteep Shortpass and Longpass Filters

Edge filters with very short transitions between stopband and transmission range. 

These are used for Raman applications, among others.
Team of experts
You have questions or need our support?
Please call us.
Carola Hillebrand
Carola Hillebrand
LASER COMPONENTS Germany GmbH
82140 Olching
Petra Gose
Petra Gose
LASER COMPONENTS Germany GmbH
82140 Olching
Contact Form
You would like to send us something? You can reach us by phone and by e-mail.

Laser Components

Werner-von-Siemens-Str. 15
82140 Olching
Deutschland

You will be redirected
to the Fiber Technology Website ...